I am facing an issue that appears to be network related.
I recently got a smart doorbell that is similar to the Temu X9 doorbell.
It works very well after the configuration and up to 48 hours.
The device sleeps to conserve energy and only wakes up when the button is pressed.
After the 48 hour mark it still works but not the same. It takes a few moments then it will saw the message "network connection failure" then a few moments later it will ring and work just fine.
The only way to get to work normally again is to reset it or to remove the battery for 48 hour.
This has been tested on different internet WIFI routers and in one of them the device has been assigned a static IP address so that it does not need to wait to get a new IP address again.
However, it might be related to IP leasing time.
Give me as many tips to try on the router to resolve it.
I recently got a smart doorbell that is similar to the Temu X9 doorbell.
It works very well after the configuration and up to 48 hours.
The device sleeps to conserve energy and only wakes up when the button is pressed.
After the 48 hour mark it still works but not the same. It takes a few moments then it will saw the message "network connection failure" then a few moments later it will ring and work just fine.
The only way to get to work normally again is to reset it or to remove the battery for 48 hour.
This has been tested on different internet WIFI routers and in one of them the device has been assigned a static IP address so that it does not need to wait to get a new IP address again.
However, it might be related to IP leasing time.
Give me as many tips to try on the router to resolve it.